Paddle Wheel Aerator can add oxygen, stir water and aerate at the same time, it can also cause directional water flow in the pond.When working, the leaves hit the water at high speed and stir the air into the water to achieve the purpose of increasing oxygen, which has a good effect of increasing oxygen and promoting water flow.There will be a motor cover on the outside of the motor.In order to prevent the motor from directly touching water.
Technical Description:
1.The arc bevel gear is used to replace the turbine worm,energy saving and high efficiency,more than 20% power saving than the traditional type.
2.The arc parachute gear is made of complex manganese alloy steel with carbon helium co permeation on the surface,with high hardness and long service life.
3.Adopt mechanical seal to ensure no oil leakage
4.The motor is equipped with a protector to avoid accidental buring of the motor
5.The whole floating boat and motor cover use H.D.P.E material,P.P impeller,stainless steel frame.
Sketch Map:
Water source: Borehole(diameter__mm )
Average daily water demand _____L/hour
H1 (Lift from lowest water level to ground):_____m
H2 (tank height and extra lift if any) :_____m
L (horizontal distance of water transport) :_____m
How to select Handuro model:
Handuro's max head must > H1+H2+10%L
Handuro's max flow must > Average daily water demand
Screw type(SS) or Plastic impeller type(SC) or stainless impeller type(SSC)
| Controller Voltage |
110V |
| Open Current Voltage |
<200V |
| Solar Panels Power |
≥2000W |
Technical Parameters:
Production show:
Related Products:
1. We are professional in manufacture aerators.
2. Every year 500,000 to 600,000pcs of products were exported to more than 60 countries.
3. We test the material before production for three to four times when producing, to ensure the goods in
high quality, also we produce according to your requirements.
4. We offer good production capability, good quality control, good service with 24 hours online.
5. We can be your OEM manufacturer with your authorization of brand.
6. All products are guarantee for one year.
FAQ
Q1 What's the MOQ for your production?
A:The MOQ is 1 pcs/set
Q2 Is it all right to make customer's own brand name?
A:Yes.OEM is OK.
Q3 Are you a manufacture or trading company?
A:We are a manufacture.
Q4 What is your terms of payment?
A:Normally ,its 30% T/T as deposit ,and 70% before delivery. We'll show you the photos of the products and packages before pay the balance.Also L/C is acceptable.
Q5 What is your terms of delivery?
A:EXW.FOB.CFR,CIF
Q6 How about your delivery time?
A:Generally,it will take 7-30 days after receiving your advance payment,and also depends on your quantity.
Q7 Are you support samples?
A:Yes,We support.
Q8.How about after-sales service?
A:1.About 1 year guarantee service.
2.English manual for installation & operation.
3.If required, we could send technicians for installation or by video to solve problem.
Audited Supplier 
){kind=link}