The Floating pump also named aeration irrigation dual-purpose floating pump.It is also the most basic one in aerator.It doesn't have many parts.It is a motor installed in the air chamber directly driven, floating in the water and can rise and fall with the water level of movable drainage and irrigation machinery.
Technical Description:
1.Easy to use,as long as the circular float ball is screwed together with the pump body,the oxygenation pump is put into the water and connect to the power supply,so that it can start pumping,and is not afraid of rain and water flooding.It is not limited by the head of water absorption,and the weight is very light,and the movement is very convenient.
2.Energy saving and electricity saving:the variable water head is the head of the water pressure.regardless of the size and type,the water is always in the best water absorption position at 25-50cm below the water surface.It shortens the pipeline and doesn't need to install low valve,so it can save electricity 10 to 30%.
3.Long service life:the shaft seal of the floating pump is not affected by sediment and sediment.without deep water pressure,it is impossible to fall into mud,so the shaft seal is long life.
4.The oxygen increasing nozzle can increase oxygen,increase the amount of oxygen increase in the fish pond and increase the output.
Sketch Map:
Water source: Borehole(diameter__mm )
Average daily water demand _____L/hour
H1 (Lift from lowest water level to ground):_____m
H2 (tank height and extra lift if any) :_____m
L (horizontal distance of water transport) :_____m
How to select Handuro model:
Handuro's max head must > H1+H2+10%L
Handuro's max flow must > Average daily water demand
Screw type(SS) or Plastic impeller type(SC) or stainless impeller type(SSC)
| Controller Voltage |
48v |
| Open Current Voltage |
<100V |
| Solar Panels Power |
≥1000W |
Technical Parameters:
Product Application:
Related Products:
1. We are professional in manufacture aerators.
2. Every year 500,000 to 600,000pcs of products were exported to more than 60 countries.
3. We test the material before production for three to four times when producing, to ensure the goods in
high quality, also we produce according to your requirements.
4. We offer good production capability, good quality control, good service with 24 hours online.
5. We can be your OEM manufacturer with your authorization of brand.
6. All products are guarantee for one year.
FAQ
Q1 What's the MOQ for your production?
A:The MOQ is 1 pcs/set
Q2 Is it all right to make customer's own brand name?
A:Yes.OEM is OK.
Q3 Are you a manufacture or trading company?
A:We are a manufacture.
Q4 What is your terms of payment?
A:Normally ,its 30% T/T as deposit ,and 70% before delivery. We'll show you the photos of the products and packages before pay the balance.Also L/C is acceptable.
Q5 What is your terms of delivery?
A:EXW.FOB.CFR,CIF
Q6 How about your delivery time?
A:Generally,it will take 7-30 days after receiving your advance payment,and also depends on your quantity.
Q7 Are you support samples?
A:Yes,We support.
Q8.How about after-sales service?
A:1.About 1 year guarantee service.
2.English manual for installation & operation.
3.If required, we could send technicians for installation or by video to solve problem.
Audited Supplier 
Sketch Map:
){kind=link}
){kind=link}